GP Link Soundguard

With GP-Link Clamp, perimeter protection and signs are mounted on barriers without drilling.

Barriers

Reduce the sound level with white panel sections or create a sense of community with window panels.

Noise-reducing shell protection part for Worxsafe SoundGuard that is mounted on GP-Link. Panel section 2.2 m wide.

GP Link Sound Guard - Panel section 2.2 m - 832119

The wide part for Worxsafe SoundGuard is a perimeter protection that is mounted on GP-Link. The panels are easy to install and can be built up to 4 meters high (including barrier). It has strong noise-reducing properties.

- Weight: 35 kg
- Length: 2200 mm
- Height: 1235 mm

Part for Worxsafe SoundGuard, a shell protection that dampens noise and is mounted on the GP-Link.

GP Link Sound Guard - Panel section 0.7 m - 832122

Worxsafe SoundGuard is a perimeter protection that is mounted on GP-Link. The panels are easy to install and can be built up to 4 meters high (including barrier). It has strong noise-reducing properties.

- Weight: 20 kg
- Length: 680 mm
- Height: 1235 mm

Window sections for GP Link Sound Guard that provide visibility into a protected workplace.

GP Link Sound Guard - Window panel 2.2 m - 832218

If you want to check where interested people should stand safely, you place window sections in the appropriate place.

- Weight: 33 kg
- Length: 2200 mm
- Height: 1235 mm

Smaller window sections for the GP Link Sound Guard that provide visibility into a protected workplace.

GP Link Sound Guard Window Panel 0.7 m - 832729

If you want to ensure that interested people stand safely, you can place window sections in appropriate locations.

- Weight: 16 kg
- Length: 700 mm
- Height: 1235 mm

Net section to provide less wind catch on the GP Link Sound Guard. Used to obtain a protected workplace.

GP Link Sound Guard - Corner panel top - 832153

Bendable mesh section - complement to Sound Guard. Increase the height of the perimeter protection without increasing the wind load.

- Weight: 3.5
- Length: 633 mm
- Height: 840 mm

GP Link Sound Guard Panel Section Corner - 831679

GP Link Sound Guard - Hörnpanel - 831679

Flexibelt gummihörn för att enkelt kunna följa svängar och hörn.

- Vikt: 20 kg
- Längd: 576 mm
- Höjd: 1235 mm

Fence & Barb wire

Increase the height of the installation without increasing the wind load by using top nets or make it harder for intruders with accompanying barbed wire.

Protection that increases the protection height without getting caught in the wind on the shell protection GP Link Sound Guard.

GP Link Sound Guard - Top Net 2.3 m - 832081

Increases the height of the perimeter protection without increasing the wind load.

- Weight: 12 kg
- Length: 2275 mm
- Height: 988 mm

GP Link Sound Guard - Top Net 0.8 m - 832149

Increases the height of the perimeter protection without increasing the wind load.

- Weight: 5 kg
- Length: 755 mm
- Height: 988 mm

GP Link Sound Guard - Barbed Wire 2.3 m - 831923

Double-section barbed wire is mounted at the top of the SoundGuard and reinforces the effect of the perimeter protection.

- Weight: 2.5 kg
- Length: 2275 mm
- Height: 205 mm

GP Link Sound Guard - Barbed Wire 0.8 m - 832331

Single-section barbed wire is mounted at the top of the SoundGuard and reinforces the effect of the shell protection.

- Weight: 1 kg
- Length: 755 mm
- Height: 205 mm

Posts for Sound Guard

Posts and brackets for Sound Guard.

Mounting post for basic version. Attaches to GP-Link - Tving for GP Link - Sound Guard.

GP Link Sound Guard - Base Post - 831674

Post for basic installation.
Attaches to GP-Link - Clamp.

- Weight: 6 kg
- Height: 1233 mm
- Width 122 mm

Top net post for basic version. Attaches to GP-Link - Tving for GP Link - Sound Guard.

GP Link Sound Guard - Top Net Post - 832092

Top Net Post for GP-Link SoundGuard. Fastens with two screws in the Bass pole.

- Weight: 2.5 kg
- Height: 897 mm
- Width: 122 mm

Barbed wire post for basic design. Attaches to GP-Link - Tving for GP Link - Sound Guard.

GP Link Sound Guard - Barbed Wire Post - 831917

Barbed wire post for attaching barbed wire. The post is attached with two screws to the Top Net Post.

- Weight: 1 kg
- Height: 205 mm
- Width: 122 mm

Tillbehör Soundguard